Runtime Loading

These are the various classes that can be plugged in at runtime:

Register an IOServiceProvider:

 ucar.nc2.NetcdfFile.registerIOProvider( String className);

The registered class must implement ucar.nc2.IOServiceProvider. When a NetcdfFile is opened, we loop through the IOServiceProvider classes and call

  boolean isValidFile( ucar.unidata.io.RandomAccessFile raf)

on each, until one returns true. This method must be fast and accurate.

Register a CoordSysBuilder:

 ucar.nc2.dataset.CoordSysBuilder.registerConvention( String conventionName, String className);

The registered class must implement ucar.nc2.dataset.CoordSysBuilderIF. The NetcdfDataset is checked if it has a Convention attribute, and if so, it is matched by conventionName. If not, loop through the CoordSysBuilderIF classes and call

 boolean isMine(NetcdfFile ncfile)

on each, until one returns true. If none are found, use the default _Coordinate Convention.

Register a CoordTransBuilder:

 ucar.nc2.dataset.CoordTransBuilder.registerTransform( String transformName, String className);

The registered class must implement ucar.nc2.dataset.CoordTransBuilderIF. The Coordinate Transform Variable must have the transform name as one of its parameters.

Register a FeatureDatasetFactory:

 ucar.nc2.ft.FeatureDatasetFactoryManager.registerFactory( FeatureType featureType, String className);

The registered class must implement ucar.nc2.ft.FeatureDatasetFactory, see javadoc for that interface.

Register a GRIB1 or GRIB2 Lookup Table (4.2 and before):

  ucar.grib.grib1.GribPDSParamTable.addParameterUserLookup( String filename);
  ucar.grib.grib2.ParameterTable.addParametersUser( String filename);

Register a GRIB1 table (4.3):

  ucar.nc2.grib.grib1.tables.Grib1ParamTables.addParameterTable(int center, int subcenter, int tableVersion, String tableFilename);

This registers a single table for the given center/subcenter/version.
See GribTables for more information about parameter tables.
GRIB2 table handling is still being developed.

Register a GRIB1 lookup table (4.3):

 ucar.nc2.grib.grib1.tables.Grib1ParamTables.addParameterTableLookup(String lookupFilename);

This registers one or more tables for different center/subcenter/versions.
See GribTables for more information about lookup tables.
GRIB2 table handling is still being developed.

Register a BUFR Table lookup:

  ucar.nc2.iosp.bufr.tables.BufrTables.addLookupFile( String filename) throws throws FileNotFoundException;

The file must be a BUFR table lookup file.

Runtime Configuration

Instead of calling the above routines in your code, you can pass the CDM library an XML configuration file. Note that your application must call ucar.nc2.util.xml.RuntimeConfigParser.read().

The configuration file looks like this:

 <?xml version="1.0"?>
 <nj22Config>

1) <ioServiceProvider  class="edu.univ.ny.stuff.FooFiles"/>
2) <coordSysBuilder convention="foo" class="test.Foo"/>
3) <coordTransBuilder name="atmos_ln_sigma_coordinates" type="vertical" class="my.stuff.atmosSigmaLog"/>
4) <featureDatasetFactory featureType="Point" class="gov.noaa.obscure.file.Flabulate"/>
5) <gribParameterTable edition="1" center="58" subcenter="-1" version="128">C:/grib/tables/ons288.xml</gribParameterTable>
6) <gribParameterTableLookup edition="1">C:/grib/tables/ncepLookup.txt</gribParameterTableLookup>
7) <table type="GRIB1" filename="/grib/tables/userlookup.lst"/>
8) <table type="GRIB2" filename="/grib/tables/grib2userparameters" />
9) <bufrtable filename="C:/my/files/lookup.txt" />
10)<grib1Table strict="false"/>
11)<Netcdf4Clibrary>
     <libraryPath>/usr/local/lib</libraryPath>
     <libraryName>netcdf</libraryName>
     <useForReading>false</useForReading>
  </Netcdf4Clibrary>
</nj22Config>

Loads an IOServiceProvider with the given class name
Loads a CoordSysBuilderIF with the given class name, which looks for the given Convention attribute value.
Loads a CoordTransBuilderIF with the given class name, which looks for the given transformName in the dataset. The type must be vertical or projection.
Loads a FeatureDatasetFactory with the given class name which open FeatureDatasets of the given featureType.
Load a GRIB-1 parameter table (as of version 4.3)
Load a GRIB-1 parameter table lookup (as of version 4.3)
Load a GRIB-1 parameter lookup table (versions < 4.3, deprecated)
Load a GRIB-2 parameter lookup table (versions < 4.3, deprecated)
Load a BUFR table lookup file
Turn strict GRIB1 table handling off.
Configure how the NetCDF-4 C library is discovered and used.
- libraryPath: The directory in which the native library is installed.
- libraryName: The name of the native library. This will be used to locate the proper .DLL, .SO, or .DYLIB file within the libraryPath directory.
- useForReading: By default, the native library is only used for writing NetCDF-4 files; a pure-Java layer is responsible for reading them. However, if this property is set to true, then it will be used for reading NetCDF-4 (and HDF5) files as well.

There are several ways pass the Runtime Configuration XML to the CDM library. From your application, you can pass a java.io.InputStream (or JDOM element) to ucar.nc2.util.xml.RuntimeConfigParser, as in the following examples:

  // Example 1: read from file
  StringBuffer errlog = new StringBuffer();
  FileInputStream fis = new FileInputStream( filename);   
  ucar.nc2.util.RuntimeConfigParser.read( fis, errlog);
  System.out.println( errlog);

  // Example 2: read from resource
  ClassLoader cl = this.getClassLoader();
  InputStream is = cl.getResourceAsStream("resources/nj22/configFile.xml");
  ucar.nc2.util.RuntimeConfigParser.read( is, errlog);

  // Example 3: extract JDOM element from a larger XML document:
  Document doc;
  SAXBuilder saxBuilder = new SAXBuilder();
  saxBuilder.setExpandEntities(false);
  try {
    doc = saxBuilder.build(filename);
  } catch (JDOMException e) {
    throw new IOException(e.getMessage());
  }
  Element root = doc.getRootElement();
  Element elem = root.getChild("nj22Config");
  if (elem != null)
    ucar.nc2.util.RuntimeConfigParser.read( elem, errlog);

For example, the ToolsUI application allows you to specify this file on the command line with the -nj22Config parameter:

   public void main(String[] args) {

      for (int i = 0; i < args.length; i++) {
        if (args[i].equalsIgnoreCase("-nj22Config") && (i < args.length-1)) {
          String runtimeConfig = args[i+1];
          i++;
          try {
            StringBuffer errlog = new StringBuffer();

    FileInputStream fis = new FileInputStream( runtimeConfig);
 ucar.nc2.util.xml.RuntimeConfigParser.read( fis, errlog);
            System.out.println( errlog);
          } catch (IOException ioe) {
            System.out.println( "Error reading "+runtimeConfig+"="+ioe.getMessage());
          }
        }
      }
    ...

If none is specified on the command line, it will look for the XML document in $USER_HOME/.unidata/nj22Config.xml.

Runtime Loading of IOSP using javax.imageio.spi.ServiceRegistry

(as of version 4.3.9)

You can create an IOSP and have it discovered at runtime automatically.

Your class must implement ucar.nc2.iosp.IOServiceProvider
Create a JAR file with a services subdirectory in the META-INF directory. This directory contains a file called ucar.nc2.iosp.IOServiceProvider, which contains the name(s) of the implementing class(es). For example, if the JAR file contained a class named com.mycompany.MyIOSP, the JAR file would contain a file named:
```
 META-INF/services/ucar.nc2.iosp.IOServiceProvider 
```
containing the line:
```
com.mycompany.MyIOSP
```
See:

http://docs.oracle.com/javase/1.4.2/docs/api/javax/imageio/spi/ServiceRegistry.html

(thanks to Tom Kunicki at USGS for this contribution)

This document was last updated on June 2016.