RandomAccessFile (NetCDF-Java CDM Public API v5.5.4-SNAPSHOT)

java.lang.Object
- ucar.unidata.io.RandomAccessFile

All Implemented Interfaces:

java.io.Closeable, java.io.DataInput, java.io.DataOutput, java.lang.AutoCloseable, ucar.nc2.util.cache.FileCacheable

Direct Known Subclasses:

InMemoryRandomAccessFile, RemoteRandomAccessFile
```
@NotThreadSafe
public class RandomAccessFile
extends java.lang.Object
implements java.io.DataInput, java.io.DataOutput, ucar.nc2.util.cache.FileCacheable, java.io.Closeable
```
A class intended as drop-in replacement for java.io.RandomAccessFile, with some notable extensions:
- Buffered I/O: instances of this class realise substantial speed increases over * java.io.RandomAccessFile through the use of buffering.
- Read String methods support user-specified Charsets (default UTF-8).
- Support for both big and little endiannness on reads and write: users may specify the byte order for I/O operations.
- Support for distributed file access through the RandomAccessDirectory subclass.
This is a subclass of Object, as it was not possible to subclass java.io.RandomAccessFile because many of the methods are final. However, if it is necessary to use RandomAccessFile and java.io.RandomAccessFile interchangeably, both classes implement the DataInput and DataOutput interfaces.

By Russ Rew, based on BufferedRandomAccessFile by Alex McManus, based on Sun's source code for java.io.RandomAccessFile. For Alex McManus version from which this derives, see his Freeware Java Classes.
Must be thread confined - that is, can only be used by a single thread at a time..
See Also:

DataInput, DataOutput, RandomAccessFile

Field Summary

Fields
Modifier and Type Field and Description

static int BIG_ENDIAN

static int LITTLE_ENDIAN

Fields
Modifier and Type	Field and Description
`static int`	`BIG_ENDIAN`
`static int`	`LITTLE_ENDIAN`

Constructor Summary

Constructors
Constructor and Description
`RandomAccessFile(java.lang.String location, java.lang.String mode)` Constructor, default buffer size.
`RandomAccessFile(java.lang.String location, java.lang.String mode, int bufferSize)` Constructor.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`static RandomAccessFile`	`acquire(java.lang.String location)`
`static RandomAccessFile`	`acquire(java.lang.String location, int buffer_size)`
`void`	`close()` Close the file, and release any associated system resources.
`static void`	`eject(java.lang.String location)`
`static void`	`enableDefaultGlobalFileCache()`
`void`	`flush()` Copy the contents of the buffer to the disk.
`int`	`getBufferSize()` Get the buffer size
`long`	`getFilePointer()` Returns the current position in the file, where the next read or write will occur.
`static ucar.nc2.util.cache.FileCacheIF`	`getGlobalFileCache()`
`long`	`getLastModified()`
`java.lang.String`	`getLocation()` Get the file location, or name.
`java.io.RandomAccessFile`	`getRandomAccessFile()` Allow access to the underlying java.io.RandomAccessFile.
`boolean`	`isAtEndOfFile()` Returns true if file pointer is at end of file.
`boolean`	`isDirectory()` Returns true if RandomAccessFile represents a directory structure
`long`	`length()` Get the length of the file.
`void`	`order(java.nio.ByteOrder bo)`
`void`	`order(int endian)` Change the current endian mode.
`int`	`read()` Read a byte of data from the file, blocking until data is available.
`int`	`read(byte[] b)` Read up to `b.length( )` bytes into an array.
`int`	`read(byte[] b, int off, int len)` Read up to `len` bytes into an array, at a specified offset.
`boolean`	`readBoolean()` Reads a `boolean` from this file.
`byte`	`readByte()` Reads a signed 8-bit value from this file.
`int`	`readBytes(byte[] b, int off, int len)` Read up to `len` bytes into an array, at a specified offset.
`byte[]`	`readBytes(int count)` Read fully count number of bytes
`char`	`readChar()` Reads a Unicode character from this file.
`double`	`readDouble()` Reads a `double` from this file.
`void`	`readDouble(double[] pa, int start, int n)` Read an array of doubles
`float`	`readFloat()` Reads a `float` from this file.
`void`	`readFloat(float[] pa, int start, int n)` Read an array of floats
`void`	`readFully(byte[] b)` Reads `b.length` bytes from this file into the byte array.
`void`	`readFully(byte[] b, int off, int len)` Reads exactly `len` bytes from this file into the byte array.
`int`	`readInt()` Reads a signed 32-bit integer from this file.
`void`	`readInt(int[] pa, int start, int n)` Read an array of ints
`int`	`readIntUnbuffered(long pos)` Read an integer at the given position, bypassing all buffering.
`java.lang.String`	`readLine()` Reads the next line of text from this file.
`java.lang.String`	`readLine(java.nio.charset.Charset charset)` Read the next line of text as the specified charset The charset parameter is an extension not implemented in java.io.RandomAccessFile.
`long`	`readLong()` Reads a signed 64-bit integer from this file.
`void`	`readLong(long[] pa, int start, int n)` Read an array of longs
`short`	`readShort()` Reads a signed 16-bit number from this file.
`void`	`readShort(short[] pa, int start, int n)` Read an array of shorts
`java.lang.String`	`readString(int nbytes)` Read a String of known length.
`java.lang.String`	`readString(int nbytes, java.nio.charset.Charset charset)` Read a String of known length as the specified charset.
`java.lang.String`	`readStringMax(int nbytes)` Read a String of max length, zero terminate.
`java.lang.String`	`readStringMax(int nbytes, java.nio.charset.Charset charset)` Read a String of max length as the specified charset, zero terminate.
`long`	`readToByteChannel(java.nio.channels.WritableByteChannel dest, long offset, long nbytes)` Read `nbytes` bytes, at the specified file offset, send to a WritableByteChannel.
`int`	`readUnsignedByte()` Reads an unsigned 8-bit number from this file.
`int`	`readUnsignedShort()` Reads an unsigned 16-bit number from this file.
`java.lang.String`	`readUTF()` Reads in a string from this file.
`boolean`	`searchForward(KMPMatch match, int maxBytes)` Search forward from the current pos, looking for a match.
`void`	`seek(long pos)` Set the position in the file for the next read or write.
`void`	`setBufferSize(int bufferSize)` Set the buffer size.
`void`	`setExtendMode()` Set extendMode for truncated, yet valid files - old NetCDF code allowed this when NOFILL on, and user doesnt write all variables.
`static void`	`setGlobalFileCache(ucar.nc2.util.cache.FileCacheIF _cache)`
`void`	`setMinLength(long minLength)` Make sure file is at least this long when its closed.
`static void`	`shutdown()`
`int`	`skipBytes(int n)` Skips exactly `n` bytes of input.
`long`	`skipBytes(long n)`
`java.lang.String`	`toString()` Create a string representation of this object.
`void`	`unread()` Unread the last byte read.
`void`	`write(byte[] b)` Writes `b.length` bytes from the specified byte array starting at offset `off` to this file.
`void`	`write(byte[] b, int off, int len)` Writes `len` bytes from the specified byte array starting at offset `off` to this file.
`void`	`write(int b)` Write a byte to the file.
`void`	`writeBoolean(boolean v)` Writes a `boolean` to the file as a 1-byte value.
`void`	`writeBoolean(boolean[] pa, int start, int n)` Write an array of booleans
`void`	`writeByte(int v)` Writes a `byte` to the file as a 1-byte value.
`void`	`writeBytes(byte[] b, int off, int len)` Write `len` bytes from an array to the file.
`void`	`writeBytes(char[] b, int off, int len)` Writes the character array to the file as a sequence of bytes.
`void`	`writeBytes(java.lang.String s)` Writes the string to the file as a sequence of bytes.
`void`	`writeChar(char[] pa, int start, int n)` Write an array of chars
`void`	`writeChar(char[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of chars with the provided byte order.
`void`	`writeChar(char[] pa, int start, int n, int endian)` Write an array of chars with the provided endianness.
`void`	`writeChar(int v)` Writes a `char` to the file as a 2-byte value, high byte first.
`void`	`writeChar(int v, java.nio.ByteOrder bo)` Writes a `char` to the file as a 2-byte value with the provided byte order.
`void`	`writeChar(int v, int endian)` Writes a `char` to the file as a 2-byte value with the provided endianness.
`void`	`writeChars(java.lang.String s)` Writes a string to the file as a sequence of characters.
`void`	`writeChars(java.lang.String s, java.nio.ByteOrder bo)` Writes a string to the file as a sequence of characters.
`void`	`writeChars(java.lang.String s, int endian)` Writes a string to the file as a sequence of characters.
`void`	`writeDouble(double v)` Converts the double argument to a `long` using the `doubleToLongBits` method in class `Double`, and then writes that `long` value to the file as an 8-byte quantity, high byte first.
`void`	`writeDouble(double[] pa, int start, int n)` Write an array of doubles
`void`	`writeDouble(double[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of doubles with the provided byte order.
`void`	`writeDouble(double[] pa, int start, int n, int endian)` Write an array of doubles with the provided endianness.
`void`	`writeDouble(double v, java.nio.ByteOrder bo)` Converts the double argument to a `long` using the `doubleToLongBits` method in class `Double`, and then writes that `long` value to the file as an 8-byte quantity, with the provided byte order.
`void`	`writeDouble(double v, int endian)` Converts the double argument to a `long` using the `doubleToLongBits` method in class `Double`, and then writes that `long` value to the file as an 8-byte quantity, with the provided endianness.
`void`	`writeFloat(float v)` Converts the float argument to an `int` using the `floatToIntBits` method in class `Float`, and then writes that `int` value to the file as a 4-byte quantity, high byte first.
`void`	`writeFloat(float[] pa, int start, int n)` Write an array of floats
`void`	`writeFloat(float[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of floats with the provided byte order.
`void`	`writeFloat(float[] pa, int start, int n, int endian)` Write an array of floats with the provided endianness.
`void`	`writeFloat(float v, java.nio.ByteOrder bo)` Converts the float argument to an `int` using the `floatToIntBits` method in class `Float`, and then writes that `int` value to the file as a 4-byte quantity, with the provided byte order.
`void`	`writeFloat(float v, int endian)` Converts the float argument to an `int` using the `floatToIntBits` method in class `Float`, and then writes that `int` value to the file as a 4-byte quantity, with the provided endianness.
`void`	`writeInt(int v)` Writes an `int` to the file as four bytes, high byte first.
`void`	`writeInt(int[] pa, int start, int n)` Write an array of ints
`void`	`writeInt(int[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of ints with the provided byte order.
`void`	`writeInt(int[] pa, int start, int n, int endian)` Write an array of ints with the provided endianness.
`void`	`writeInt(int v, java.nio.ByteOrder bo)` Writes an `int` to the file as four bytes with the provided byte order.
`void`	`writeInt(int v, int endian)` Writes an `int` to the file as four bytes with the provided endianness.
`void`	`writeLong(long v)` Writes a `long` to the file as eight bytes, high byte first.
`void`	`writeLong(long[] pa, int start, int n)` Write an array of longs
`void`	`writeLong(long[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of longs with the provided byte order.
`void`	`writeLong(long[] pa, int start, int n, int endian)` Write an array of longs with the provided endianness.
`void`	`writeLong(long v, java.nio.ByteOrder bo)` Writes a `long` to the file as eight bytes with the provided byte order.
`void`	`writeLong(long v, int endian)` Writes a `long` to the file as eight bytes with the provided endianness.
`void`	`writeShort(int v)` Writes a `short` to the file as two bytes, high byte first.
`void`	`writeShort(int v, java.nio.ByteOrder bo)` Writes a `short` to the file as two bytes with the provided byte order.
`void`	`writeShort(int v, int endian)` Writes a `short` to the file as two bytes with the provided endianness.
`void`	`writeShort(short[] pa, int start, int n)` Write an array of shorts
`void`	`writeShort(short[] pa, int start, int n, java.nio.ByteOrder bo)` Write an array of shorts with the provided byte order.
`void`	`writeShort(short[] pa, int start, int n, int endian)` Write an array of shorts with the provided endianness.
`void`	`writeUTF(java.lang.String str)` Writes a string to the file using UTF-8 encoding in a machine-independent manner.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface ucar.nc2.util.cache.FileCacheable
reacquire, release, setFileCache

- Field Detail
  - BIG_ENDIAN
```
public static final int BIG_ENDIAN
```
    See Also:
    
    Constant Field Values
  - LITTLE_ENDIAN
```
public static final int LITTLE_ENDIAN
```
    See Also:
    
    Constant Field Values
- Constructor Detail
  - RandomAccessFile
```
public RandomAccessFile(java.lang.String location,
                        java.lang.String mode)
                 throws java.io.IOException
```
    Constructor, default buffer size.
    
    Parameters:
    
    location - location of the file
    
    mode - same as for java.io.RandomAccessFile, usually "r" or "rw"
    
    Throws:
    
    java.io.IOException - on open error
  - RandomAccessFile
```
public RandomAccessFile(java.lang.String location,
                        java.lang.String mode,
                        int bufferSize)
                 throws java.io.IOException
```
    Constructor.
    
    Parameters:
    
    location - location of the file
    
    mode - same as for java.io.RandomAccessFile
    
    bufferSize - size of buffer to use.
    
    Throws:
    
    java.io.IOException - on open error
- Method Detail
  - acquire
```
public static RandomAccessFile acquire(java.lang.String location)
                                throws java.io.IOException
```
    Throws:
    
    java.io.IOException
  - acquire
```
public static RandomAccessFile acquire(java.lang.String location,
                                       int buffer_size)
                                throws java.io.IOException
```
    Throws:
    
    java.io.IOException
  - close
```
public void close()
           throws java.io.IOException
```
    Close the file, and release any associated system resources.
    
    Specified by:
    
    close in interface java.io.Closeable
    
    Specified by:
    
    close in interface java.lang.AutoCloseable
    
    Specified by:
    
    close in interface ucar.nc2.util.cache.FileCacheable
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - eject
```
public static void eject(java.lang.String location)
```
  - enableDefaultGlobalFileCache
```
public static void enableDefaultGlobalFileCache()
```
  - flush
```
public void flush()
           throws java.io.IOException
```
    Copy the contents of the buffer to the disk.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - getBufferSize
```
public int getBufferSize()
```
    Get the buffer size
    
    Returns:
    
    bufferSize length in bytes
  - getFilePointer
```
public long getFilePointer()
```
    Returns the current position in the file, where the next read or write will occur.
    
    Returns:
    
    the offset from the start of the file in bytes.
  - getGlobalFileCache
```
public static ucar.nc2.util.cache.FileCacheIF getGlobalFileCache()
```
  - getLastModified
```
public long getLastModified()
```
    Specified by:
    
    getLastModified in interface ucar.nc2.util.cache.FileCacheable
  - getLocation
```
public java.lang.String getLocation()
```
    Get the file location, or name.
    
    Specified by:
    
    getLocation in interface ucar.nc2.util.cache.FileCacheable
    
    Returns:
    
    file location
  - getRandomAccessFile
```
public java.io.RandomAccessFile getRandomAccessFile()
```
    Allow access to the underlying java.io.RandomAccessFile. WARNING! BROKEN ENCAPSOLATION, DO NOT USE. May change implementation in the future.
    
    Returns:
    
    the underlying java.io.RandomAccessFile.
  - isAtEndOfFile
```
public boolean isAtEndOfFile()
```
    Returns true if file pointer is at end of file.
  - isDirectory
```
public boolean isDirectory()
```
    Returns true if RandomAccessFile represents a directory structure
  - length
```
public long length()
            throws java.io.IOException
```
    Get the length of the file. The data in the buffer (which may not have been written the disk yet) is taken into account.
    
    Returns:
    
    the length of the file in bytes.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - order
```
public void order(java.nio.ByteOrder bo)
```
  - order
```
public void order(int endian)
```
    Change the current endian mode. Subsequent reads of short, int, float, double, long, char will use this. Does not currently affect writes - ByteOrder must be explicitly specified on writes. Default values is BIG_ENDIAN. This method is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    endian - RandomAccessFile.BIG_ENDIAN or RandomAccessFile.LITTLE_ENDIAN
  - read
```
public int read()
         throws java.io.IOException
```
    Read a byte of data from the file, blocking until data is available.
    
    Returns:
    
    the next byte of data, or -1 if the end of the file is reached.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - read
```
public int read(byte[] b)
         throws java.io.IOException
```
    Read up to b.length( ) bytes into an array. This will block until at least one byte has been read.
    
    Parameters:
    
    b - the byte array to receive the bytes.
    
    Returns:
    
    the actual number of bytes read, or -1 if there is not more data due to the end of the file being reached.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - read
```
public int read(byte[] b,
                int off,
                int len)
         throws java.io.IOException
```
    Read up to len bytes into an array, at a specified offset. This will block until at least one byte has been read.
    
    Parameters:
    
    b - the byte array to receive the bytes.
    
    off - the offset in the array where copying will start.
    
    len - the number of bytes to copy.
    
    Returns:
    
    the actual number of bytes read, or -1 if there is not more data due to the end of the file being reached.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - readBoolean
```
public final boolean readBoolean()
                          throws java.io.IOException
```
    Reads a boolean from this file. This method reads a single byte from the file. A value of 0 represents false. Any other value represents true. This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readBoolean in interface java.io.DataInput
    
    Returns:
    
    the boolean value read.
    
    Throws:
    
    java.io.EOFException - if this file has reached the end.
    
    java.io.IOException - if an I/O error occurs.
  - readByte
```
public final byte readByte()
                    throws java.io.IOException
```
    Reads a signed 8-bit value from this file. This method reads a byte from the file. If the byte read is b, where 0 <= b <= 255, then the result is:
    This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readByte in interface java.io.DataInput
    
    Returns:
    
    the next byte of this file as a signed 8-bit byte.
    
    Throws:
    
    java.io.EOFException - if this file has reached the end.
    
    java.io.IOException - if an I/O error occurs.
  - readBytes
```
public int readBytes(byte[] b,
                     int off,
                     int len)
              throws java.io.IOException
```
    Read up to len bytes into an array, at a specified offset. This will block until at least one byte has been read.
    
    Parameters:
    
    b - the byte array to receive the bytes.
    
    off - the offset in the array where copying will start.
    
    len - the number of bytes to copy.
    
    Returns:
    
    the actual number of bytes read, or -1 if there is not more data due to the end of the file being reached.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - readBytes
```
public byte[] readBytes(int count)
                 throws java.io.IOException
```
    Read fully count number of bytes
    
    Parameters:
    
    count - how many bytes tp read
    
    Returns:
    
    a byte array of length count, fully read in
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - readChar
```
public final char readChar()
                    throws java.io.IOException
```
    Reads a Unicode character from this file. This method reads two bytes from the file. If the bytes read, in order, are b1 and b2, where 0 <= b1, b2 <= 255, then the result is equal to:
    This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readChar in interface java.io.DataInput
    
    Returns:
    
    the next two bytes of this file as a Unicode character.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading two bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readDouble
```
public final double readDouble()
                        throws java.io.IOException
```
    Reads a double from this file. This method reads a long value as if by the readLong method and then converts that long to a double using the longBitsToDouble method in class Double.
    This method blocks until the eight bytes are read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readDouble in interface java.io.DataInput
    
    Returns:
    
    the next eight bytes of this file, interpreted as a double.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading eight bytes.
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    RandomAccessFile.readLong(), Double.longBitsToDouble(long)
  - readDouble
```
public final void readDouble(double[] pa,
                             int start,
                             int n)
                      throws java.io.IOException
```
    Read an array of doubles
    
    Parameters:
    
    pa - read into this array
    
    start - starting at pa[start]
    
    n - read this many elements
    
    Throws:
    
    java.io.IOException - on read error
  - readFloat
```
public final float readFloat()
                      throws java.io.IOException
```
    Reads a float from this file. This method reads an int value as if by the readInt method and then converts that int to a float using the intBitsToFloat method in class Float.
    This method blocks until the four bytes are read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readFloat in interface java.io.DataInput
    
    Returns:
    
    the next four bytes of this file, interpreted as a float.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading four bytes.
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    RandomAccessFile.readInt(), Float.intBitsToFloat(int)
  - readFloat
```
public final void readFloat(float[] pa,
                            int start,
                            int n)
                     throws java.io.IOException
```
    Read an array of floats
    
    Parameters:
    
    pa - read into this array
    
    start - starting at pa[start]
    
    n - read this many elements
    
    Throws:
    
    java.io.IOException - on read error
  - readFully
```
public final void readFully(byte[] b)
                     throws java.io.IOException
```
    Reads b.length bytes from this file into the byte array. This method reads repeatedly from the file until all the bytes are read. This method blocks until all the bytes are read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readFully in interface java.io.DataInput
    
    Parameters:
    
    b - the buffer into which the data is read.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading all the bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readFully
```
public final void readFully(byte[] b,
                            int off,
                            int len)
                     throws java.io.IOException
```
    Reads exactly len bytes from this file into the byte array. This method reads repeatedly from the file until all the bytes are read. This method blocks until all the bytes are read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readFully in interface java.io.DataInput
    
    Parameters:
    
    b - the buffer into which the data is read.
    
    off - the start offset of the data.
    
    len - the number of bytes to read.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading all the bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readInt
```
public final int readInt()
                  throws java.io.IOException
```
    Reads a signed 32-bit integer from this file. This method reads 4 bytes from the file. If the bytes read, in order, are b1, b2, b3, and b4, where 0 <= b1, b2, b3, b4 <= 255, then the result is equal to:
    This method blocks until the four bytes are read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readInt in interface java.io.DataInput
    
    Returns:
    
    the next four bytes of this file, interpreted as an int.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading four bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readInt
```
public final void readInt(int[] pa,
                          int start,
                          int n)
                   throws java.io.IOException
```
    Read an array of ints
    
    Parameters:
    
    pa - read into this array
    
    start - starting at pa[start]
    
    n - read this many elements
    
    Throws:
    
    java.io.IOException - on read error
  - readIntUnbuffered
```
public final int readIntUnbuffered(long pos)
                            throws java.io.IOException
```
    Read an integer at the given position, bypassing all buffering.
    
    Parameters:
    
    pos - read a byte at this position
    
    Returns:
    
    The int that was read
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readLine
```
public final java.lang.String readLine()
                                throws java.io.IOException
```
    Reads the next line of text from this file. This method successively reads bytes from the file, starting at the current file pointer, until it reaches a line terminator or the end of the file. Each byte is converted into a character by taking the byte's value for the lower eight bits of the character and setting the high eight bits of the character to zero. This method does not, therefore, support the full Unicode character set.
    A line of text is terminated by a carriage-return character ('\r'), a newline character ('\n'), a carriage-return character immediately followed by a newline character, or the end of the file. Line-terminating characters are discarded and are not included as part of the string returned.
    This method blocks until a newline character is read, a carriage return and the byte following it are read (to see if it is a newline), the end of the file is reached, or an exception is thrown.
    
    Specified by:
    
    readLine in interface java.io.DataInput
    
    Returns:
    
    the next line of text from this file, or null if end of file is encountered before even one byte is read.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readLine
```
public java.lang.String readLine(java.nio.charset.Charset charset)
                          throws java.io.IOException
```
    Read the next line of text as the specified charset The charset parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    charset - - character encoding to use
    
    Returns:
    
    the next line of text
    
    Throws:
    
    java.io.IOException
  - readLong
```
public final long readLong()
                    throws java.io.IOException
```
    Reads a signed 64-bit integer from this file. This method reads eight bytes from the file. If the bytes read, in order, are b1, b2, b3, b4, b5, b6, b7, and b8, where:
    then the result is equal to:
    ((long) b1 << 56) + ((long) b2 << 48) + ((long) b3 << 40) + ((long) b4 << 32) + ((long) b5 << 24) + ((long) b6 << 16) + ((long) b7 << 8) + b8
    This method blocks until the eight bytes are read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readLong in interface java.io.DataInput
    
    Returns:
    
    the next eight bytes of this file, interpreted as a long.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading eight bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readLong
```
public final void readLong(long[] pa,
                           int start,
                           int n)
                    throws java.io.IOException
```
    Read an array of longs
    
    Parameters:
    
    pa - read into this array
    
    start - starting at pa[start]
    
    n - read this many elements
    
    Throws:
    
    java.io.IOException - on read error
  - readShort
```
public final short readShort()
                      throws java.io.IOException
```
    Reads a signed 16-bit number from this file. The method reads 2 bytes from this file. If the two bytes read, in order, are b1 and b2, where each of the two values is between 0 and 255, inclusive, then the result is equal to:
    This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readShort in interface java.io.DataInput
    
    Returns:
    
    the next two bytes of this file, interpreted as a signed 16-bit number.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading two bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readShort
```
public final void readShort(short[] pa,
                            int start,
                            int n)
                     throws java.io.IOException
```
    Read an array of shorts
    
    Parameters:
    
    pa - read into this array
    
    start - starting at pa[start]
    
    n - read this many elements
    
    Throws:
    
    java.io.IOException - on read error
  - readString
```
public java.lang.String readString(int nbytes)
                            throws java.io.IOException
```
    Read a String of known length.
    
    Parameters:
    
    nbytes - number of bytes to read
    
    Returns:
    
    String wrapping the bytes.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readString
```
public java.lang.String readString(int nbytes,
                                   java.nio.charset.Charset charset)
                            throws java.io.IOException
```
    Read a String of known length as the specified charset. The charset parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    nbytes - number of bytes to reSad
    
    charset - the charset to be used to decode the bytes
    
    Returns:
    
    String wrapping the bytes.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readStringMax
```
public java.lang.String readStringMax(int nbytes)
                               throws java.io.IOException
```
    Read a String of max length, zero terminate.
    
    Parameters:
    
    nbytes - number of bytes to read
    
    Returns:
    
    String wrapping the bytes.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readStringMax
```
public java.lang.String readStringMax(int nbytes,
                                      java.nio.charset.Charset charset)
                               throws java.io.IOException
```
    Read a String of max length as the specified charset, zero terminate. The charset parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    nbytes - number of bytes to read
    
    charset - the charset to be used to decode the bytes
    
    Returns:
    
    String wrapping the bytes.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readToByteChannel
```
public long readToByteChannel(java.nio.channels.WritableByteChannel dest,
                              long offset,
                              long nbytes)
                       throws java.io.IOException
```
    Read nbytes bytes, at the specified file offset, send to a WritableByteChannel. This will block until all bytes are read. This uses the underlying file channel directly, bypassing all user buffers.
    
    Parameters:
    
    dest - write to this WritableByteChannel.
    
    offset - the offset in the file where copying will start.
    
    nbytes - the number of bytes to read.
    
    Returns:
    
    the actual number of bytes read and transfered
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - readUnsignedByte
```
public final int readUnsignedByte()
                           throws java.io.IOException
```
    Reads an unsigned 8-bit number from this file. This method reads a byte from this file and returns that byte.
    This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readUnsignedByte in interface java.io.DataInput
    
    Returns:
    
    the next byte of this file, interpreted as an unsigned 8-bit number.
    
    Throws:
    
    java.io.EOFException - if this file has reached the end.
    
    java.io.IOException - if an I/O error occurs.
  - readUnsignedShort
```
public final int readUnsignedShort()
                            throws java.io.IOException
```
    Reads an unsigned 16-bit number from this file. This method reads two bytes from the file. If the bytes read, in order, are b1 and b2, where 0 <= b1, b2 <= 255, then the result is equal to:
    This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.
    Specified by:
    
    readUnsignedShort in interface java.io.DataInput
    
    Returns:
    
    the next two bytes of this file, interpreted as an unsigned 16-bit integer.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading two bytes.
    
    java.io.IOException - if an I/O error occurs.
  - readUTF
```
public final java.lang.String readUTF()
                               throws java.io.IOException
```
    Reads in a string from this file. The string has been encoded using a modified UTF-8 format.
    The first two bytes are read as if by readUnsignedShort. This value gives the number of following bytes that are in the encoded string, not the length of the resulting string. The following bytes are then interpreted as bytes encoding characters in the UTF-8 format and are converted into characters.
    This method blocks until all the bytes are read, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    readUTF in interface java.io.DataInput
    
    Returns:
    
    a Unicode string.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before reading all the bytes.
    
    java.io.IOException - if an I/O error occurs.
    
    java.io.UTFDataFormatException - if the bytes do not represent valid UTF-8 encoding of a Unicode string.
    
    See Also:
    
    RandomAccessFile.readUnsignedShort()
  - searchForward
```
public boolean searchForward(KMPMatch match,
                             int maxBytes)
                      throws java.io.IOException
```
    Search forward from the current pos, looking for a match.
    
    Parameters:
    
    match - the match to look for.
    
    maxBytes - maximum number of bytes to search. use -1 for all
    
    Returns:
    
    true if found, file position will be at the start of the match.
    
    Throws:
    
    java.io.IOException - on read error
  - seek
```
public void seek(long pos)
          throws java.io.IOException
```
    Set the position in the file for the next read or write.
    
    Parameters:
    
    pos - the offset (in bytes) from the start of the file.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - setBufferSize
```
public void setBufferSize(int bufferSize)
```
    Set the buffer size. If writing, call flush() first.
    
    Parameters:
    
    bufferSize - length in bytes
  - setExtendMode
```
public void setExtendMode()
```
    Set extendMode for truncated, yet valid files - old NetCDF code allowed this when NOFILL on, and user doesnt write all variables.
  - setGlobalFileCache
```
public static void setGlobalFileCache(ucar.nc2.util.cache.FileCacheIF _cache)
```
  - setMinLength
```
public void setMinLength(long minLength)
```
    Make sure file is at least this long when its closed. needed when not using fill mode, and not all data is written.
    
    Parameters:
    
    minLength - minimum length of the file.
  - shutdown
```
public static void shutdown()
```
  - skipBytes
```
public int skipBytes(int n)
              throws java.io.IOException
```
    Skips exactly n bytes of input. This method blocks until all the bytes are skipped, the end of the stream is detected, or an exception is thrown.
    
    Specified by:
    
    skipBytes in interface java.io.DataInput
    
    Parameters:
    
    n - the number of bytes to be skipped.
    
    Returns:
    
    the number of bytes skipped, which is always n.
    
    Throws:
    
    java.io.EOFException - if this file reaches the end before skipping all the bytes.
    
    java.io.IOException - if an I/O error occurs.
  - skipBytes
```
public long skipBytes(long n)
               throws java.io.IOException
```
    Throws:
    
    java.io.IOException
  - toString
```
public java.lang.String toString()
```
    Create a string representation of this object.
    
    Overrides:
    
    toString in class java.lang.Object
    
    Returns:
    
    a string representation of the state of the object.
  - unread
```
public void unread()
```
    Unread the last byte read. This method should not be used more than once between reading operations, or strange things might happen.
  - write
```
public void write(byte[] b)
           throws java.io.IOException
```
    Writes b.length bytes from the specified byte array starting at offset off to this file.
    
    Specified by:
    
    write in interface java.io.DataOutput
    
    Parameters:
    
    b - the data.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - write
```
public void write(byte[] b,
                  int off,
                  int len)
           throws java.io.IOException
```
    Writes len bytes from the specified byte array starting at offset off to this file.
    
    Specified by:
    
    write in interface java.io.DataOutput
    
    Parameters:
    
    b - the data.
    
    off - the start offset in the data.
    
    len - the number of bytes to write.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - write
```
public void write(int b)
           throws java.io.IOException
```
    Write a byte to the file. If the file has not been opened for writing, an IOException will be raised only when an attempt is made to write the buffer to the file.
    Caveat: the effects of seek( )ing beyond the end of the file are undefined.
    
    Specified by:
    
    write in interface java.io.DataOutput
    
    Parameters:
    
    b - write this byte
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - writeBoolean
```
public final void writeBoolean(boolean v)
                        throws java.io.IOException
```
    Writes a boolean to the file as a 1-byte value. The value true is written out as the value (byte)1; the value false is written out as the value (byte)0.
    
    Specified by:
    
    writeBoolean in interface java.io.DataOutput
    
    Parameters:
    
    v - a boolean value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeBoolean
```
public final void writeBoolean(boolean[] pa,
                               int start,
                               int n)
                        throws java.io.IOException
```
    Write an array of booleans
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeByte
```
public final void writeByte(int v)
                     throws java.io.IOException
```
    Writes a byte to the file as a 1-byte value.
    
    Specified by:
    
    writeByte in interface java.io.DataOutput
    
    Parameters:
    
    v - a byte value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeBytes
```
public void writeBytes(byte[] b,
                       int off,
                       int len)
                throws java.io.IOException
```
    Write len bytes from an array to the file.
    
    Parameters:
    
    b - the array containing the data.
    
    off - the offset in the array to the data.
    
    len - the length of the data.
    
    Throws:
    
    java.io.IOException - if an I/O error occurrs.
  - writeBytes
```
public final void writeBytes(char[] b,
                             int off,
                             int len)
                      throws java.io.IOException
```
    Writes the character array to the file as a sequence of bytes. Each character in the string is written out, in sequence, by discarding its high eight bits.
    
    Parameters:
    
    b - a character array of bytes to be written.
    
    off - the index of the first character to write.
    
    len - the number of characters to write.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeBytes
```
public final void writeBytes(java.lang.String s)
                      throws java.io.IOException
```
    Writes the string to the file as a sequence of bytes. Each character in the string is written out, in sequence, by discarding its high eight bits.
    
    Specified by:
    
    writeBytes in interface java.io.DataOutput
    
    Parameters:
    
    s - a string of bytes to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeChar
```
public final void writeChar(char[] pa,
                            int start,
                            int n)
                     throws java.io.IOException
```
    Write an array of chars
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeChar
```
public final void writeChar(char[] pa,
                            int start,
                            int n,
                            java.nio.ByteOrder bo)
                     throws java.io.IOException
```
    Write an array of chars with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeChar
```
public final void writeChar(char[] pa,
                            int start,
                            int n,
                            int endian)
                     throws java.io.IOException
```
    Write an array of chars with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeChar
```
public final void writeChar(int v)
                     throws java.io.IOException
```
    Writes a char to the file as a 2-byte value, high byte first.
    
    Specified by:
    
    writeChar in interface java.io.DataOutput
    
    Parameters:
    
    v - a char value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeChar
```
public void writeChar(int v,
                      java.nio.ByteOrder bo)
               throws java.io.IOException
```
    Writes a char to the file as a 2-byte value with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a char value to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeChar
```
public void writeChar(int v,
                      int endian)
               throws java.io.IOException
```
    Writes a char to the file as a 2-byte value with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a char value to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeChars
```
public final void writeChars(java.lang.String s)
                      throws java.io.IOException
```
    Writes a string to the file as a sequence of characters. Each character is written to the data output stream as if by the writeChar method.
    
    Specified by:
    
    writeChars in interface java.io.DataOutput
    
    Parameters:
    
    s - a String value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    RandomAccessFile.writeChar(int)
  - writeChars
```
public void writeChars(java.lang.String s,
                       java.nio.ByteOrder bo)
                throws java.io.IOException
```
    Writes a string to the file as a sequence of characters. Each character is written to the data output stream as if by the writeChar method, with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    s - a String value to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    RandomAccessFile.writeChar(int)
  - writeChars
```
public void writeChars(java.lang.String s,
                       int endian)
                throws java.io.IOException
```
    Writes a string to the file as a sequence of characters. Each character is written to the data output stream as if by the writeChar method, with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    s - a String value to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    RandomAccessFile.writeChar(int)
  - writeDouble
```
public final void writeDouble(double v)
                       throws java.io.IOException
```
    Converts the double argument to a long using the doubleToLongBits method in class Double, and then writes that long value to the file as an 8-byte quantity, high byte first.
    
    Specified by:
    
    writeDouble in interface java.io.DataOutput
    
    Parameters:
    
    v - a double value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Double.doubleToLongBits(double)
  - writeDouble
```
public final void writeDouble(double[] pa,
                              int start,
                              int n)
                       throws java.io.IOException
```
    Write an array of doubles
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeDouble
```
public final void writeDouble(double[] pa,
                              int start,
                              int n,
                              java.nio.ByteOrder bo)
                       throws java.io.IOException
```
    Write an array of doubles with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeDouble
```
public final void writeDouble(double[] pa,
                              int start,
                              int n,
                              int endian)
                       throws java.io.IOException
```
    Write an array of doubles with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeDouble
```
public final void writeDouble(double v,
                              java.nio.ByteOrder bo)
                       throws java.io.IOException
```
    Converts the double argument to a long using the doubleToLongBits method in class Double, and then writes that long value to the file as an 8-byte quantity, with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a double value to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Double.doubleToLongBits(double)
  - writeDouble
```
public final void writeDouble(double v,
                              int endian)
                       throws java.io.IOException
```
    Converts the double argument to a long using the doubleToLongBits method in class Double, and then writes that long value to the file as an 8-byte quantity, with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a double value to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Double.doubleToLongBits(double)
  - writeFloat
```
public final void writeFloat(float v)
                      throws java.io.IOException
```
    Converts the float argument to an int using the floatToIntBits method in class Float, and then writes that int value to the file as a 4-byte quantity, high byte first.
    
    Specified by:
    
    writeFloat in interface java.io.DataOutput
    
    Parameters:
    
    v - a float value to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Float.floatToIntBits(float)
  - writeFloat
```
public final void writeFloat(float[] pa,
                             int start,
                             int n)
                      throws java.io.IOException
```
    Write an array of floats
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeFloat
```
public final void writeFloat(float[] pa,
                             int start,
                             int n,
                             java.nio.ByteOrder bo)
                      throws java.io.IOException
```
    Write an array of floats with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeFloat
```
public final void writeFloat(float[] pa,
                             int start,
                             int n,
                             int endian)
                      throws java.io.IOException
```
    Write an array of floats with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeFloat
```
public final void writeFloat(float v,
                             java.nio.ByteOrder bo)
                      throws java.io.IOException
```
    Converts the float argument to an int using the floatToIntBits method in class Float, and then writes that int value to the file as a 4-byte quantity, with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a float value to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Float.floatToIntBits(float)
  - writeFloat
```
public final void writeFloat(float v,
                             int endian)
                      throws java.io.IOException
```
    Converts the float argument to an int using the floatToIntBits method in class Float, and then writes that int value to the file as a 4-byte quantity, with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a float value to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
    
    See Also:
    
    Float.floatToIntBits(float)
  - writeInt
```
public final void writeInt(int v)
                    throws java.io.IOException
```
    Writes an int to the file as four bytes, high byte first.
    
    Specified by:
    
    writeInt in interface java.io.DataOutput
    
    Parameters:
    
    v - an int to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeInt
```
public final void writeInt(int[] pa,
                           int start,
                           int n)
                    throws java.io.IOException
```
    Write an array of ints
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeInt
```
public final void writeInt(int[] pa,
                           int start,
                           int n,
                           java.nio.ByteOrder bo)
                    throws java.io.IOException
```
    Write an array of ints with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeInt
```
public final void writeInt(int[] pa,
                           int start,
                           int n,
                           int endian)
                    throws java.io.IOException
```
    Write an array of ints with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeInt
```
public final void writeInt(int v,
                           java.nio.ByteOrder bo)
                    throws java.io.IOException
```
    Writes an int to the file as four bytes with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - an int to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeInt
```
public final void writeInt(int v,
                           int endian)
                    throws java.io.IOException
```
    Writes an int to the file as four bytes with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - an int to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeLong
```
public final void writeLong(long v)
                     throws java.io.IOException
```
    Writes a long to the file as eight bytes, high byte first.
    
    Specified by:
    
    writeLong in interface java.io.DataOutput
    
    Parameters:
    
    v - a long to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeLong
```
public final void writeLong(long[] pa,
                            int start,
                            int n)
                     throws java.io.IOException
```
    Write an array of longs
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeLong
```
public final void writeLong(long[] pa,
                            int start,
                            int n,
                            java.nio.ByteOrder bo)
                     throws java.io.IOException
```
    Write an array of longs with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeLong
```
public final void writeLong(long[] pa,
                            int start,
                            int n,
                            int endian)
                     throws java.io.IOException
```
    Write an array of longs with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - write this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeLong
```
public final void writeLong(long v,
                            java.nio.ByteOrder bo)
                     throws java.io.IOException
```
    Writes a long to the file as eight bytes with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a long to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeLong
```
public final void writeLong(long v,
                            int endian)
                     throws java.io.IOException
```
    Writes a long to the file as eight bytes with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a long to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeShort
```
public final void writeShort(int v)
                      throws java.io.IOException
```
    Writes a short to the file as two bytes, high byte first.
    
    Specified by:
    
    writeShort in interface java.io.DataOutput
    
    Parameters:
    
    v - a short to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeShort
```
public void writeShort(int v,
                       java.nio.ByteOrder bo)
                throws java.io.IOException
```
    Writes a short to the file as two bytes with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a short to be written.
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeShort
```
public final void writeShort(int v,
                             int endian)
                      throws java.io.IOException
```
    Writes a short to the file as two bytes with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    v - a short to be written.
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.
  - writeShort
```
public final void writeShort(short[] pa,
                             int start,
                             int n)
                      throws java.io.IOException
```
    Write an array of shorts
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    Throws:
    
    java.io.IOException - on read error
  - writeShort
```
public final void writeShort(short[] pa,
                             int start,
                             int n,
                             java.nio.ByteOrder bo)
                      throws java.io.IOException
```
    Write an array of shorts with the provided byte order. The byte order parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    bo - Endianness of the file as a ByteOrder
    
    Throws:
    
    java.io.IOException - on read error
  - writeShort
```
public final void writeShort(short[] pa,
                             int start,
                             int n,
                             int endian)
                      throws java.io.IOException
```
    Write an array of shorts with the provided endianness. The endian parameter is an extension not implemented in java.io.RandomAccessFile.
    
    Parameters:
    
    pa - write from this array
    
    start - starting with this element in the array
    
    n - this number of elements
    
    endian - Endianness of the file as an int (0 = big endian, 1 = little endian)
    
    Throws:
    
    java.io.IOException - on read error
  - writeUTF
```
public final void writeUTF(java.lang.String str)
                    throws java.io.IOException
```
    Writes a string to the file using UTF-8 encoding in a machine-independent manner.
    First, two bytes are written to the file as if by the writeShort method giving the number of bytes to follow. This value is the number of bytes actually written out, not the length of the string. Following the length, each character of the string is output, in sequence, using the UTF-8 encoding for each character.
    
    Specified by:
    
    writeUTF in interface java.io.DataOutput
    
    Parameters:
    
    str - a string to be written.
    
    Throws:
    
    java.io.IOException - if an I/O error occurs.

Class RandomAccessFile

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Methods inherited from interface ucar.nc2.util.cache.FileCacheable

Field Detail

BIG_ENDIAN

LITTLE_ENDIAN

Constructor Detail

RandomAccessFile

RandomAccessFile

Method Detail

acquire

acquire

close

eject

enableDefaultGlobalFileCache

flush

getBufferSize

getFilePointer

getGlobalFileCache

getLastModified

getLocation

getRandomAccessFile

isAtEndOfFile

isDirectory

length

order

order

read

read

read

readBoolean

readByte

readBytes

readBytes

readChar

readDouble

readDouble

readFloat

readFloat

readFully

readFully

readInt

readInt

readIntUnbuffered

readLine

readLine

readLong

readLong

readShort

readShort

readString

readString

readStringMax

readStringMax

readToByteChannel

readUnsignedByte

readUnsignedShort

readUTF

searchForward

seek

setBufferSize

setExtendMode

setGlobalFileCache

setMinLength

shutdown

skipBytes

skipBytes

toString

unread

write

write

write

writeBoolean

writeBoolean

writeByte

writeBytes

writeBytes