_Coordinate Attribute Convention (Tutorial)


 

Coordinate Systems UML

See also :

Contents:

  1. Example 1: Simple Coordinate Variables
  2. Example 2: Coordinate System Variable
  3. Example 3: Multiple Coordinate Systems
  4. Example 4: Adding Coordinate Transforms
  5. Example 5: Reusing Variables for Coordinate System and/or Coordinate Transform Variables
  6. Implicit Coordinate Systems
  7. Coordinate Transform Variables

Examples

Example 1: Simple Coordinate Variables

 dimensions:
lon = 144;
lat = 73;
level = 17;
time = UNLIMITED; // (13 currently)
variables:
float earth(time, level, lat, lon);
earth:units = "K";
earth:long_name = "mean Daily Soil temperature";
earth:_CoordinateAxes="time level lat lon"; float air(time, level, lat, lon);
air:units = "K";
air:long_name = "mean Daily Air temperature";
air:_CoordinateAxes="time level lat lon";
float lat(lat);
lat:long_name = "Latitude";
lat:units = "degrees_north"; lat:_CoordinateAxisType="Lat";

float lon(lon);
lon:long_name = "Longitude";
lon:units = "degrees_east";
lon:_CoordinateAxisType="Lon"; float level(level);
level:units = "millibar";
level:long_name = "Level";
level:positive = "down";
level:_CoordinateAxisType="Pressure";
double time(time);
time:units = "days since 1970-01-01 00:00:0.0";
time:long_name = "Time";
time:_CoordinateAxisType="Time";

In this simple case, both data Variables explicitly name their CoordinateAxes with the _CoordinateAxes attribute. Each CoordinateAxis has a _CoordinateAxisType attribute. A single CoordinateSystem is defined which both data Variables share.

Rule: A CoordinateAxis is identified in one of 2 ways:

  1. having the attribute _CoordinateAxisType.
  2. being listed in a _CoordinateAxes attribute.

Rule: A CoordinateSystem is uniquely determined by its list of CoordinateAxes.

Rule: A CoordinateSystem may be implicitly defined by a data Variable's _CoordinateAxes attribute.

Example 2: Coordinate System Variable

 dimensions:
lon = 144;
lat = 73;
level = 17;
time = UNLIMITED; // (13 currently)
variables:
float earth(time, level, lat, lon);
earth:units = "K";
earth:long_name = "mean Daily Soil temperature";
earth:_CoordinateSystems="LatLonCoordinateSystem"; float air(time, level, lat, lon);
air:units = "K";
air:long_name = "mean Daily Air temperature";
air:_CoordinateSystems="LatLonCoordinateSystem";
float lat(lat);
lat:long_name = "Latitude";
lat:units = "degrees_north"; lat:_CoordinateAxisType="Lat";

float lon(lon);
lon:long_name = "Longitude";
lon:units = "degrees_east";
lon:_CoordinateAxisType="Lon"; float level(level);
level:units = "millibar";
level:long_name = "Level";
level:positive = "down";
level:_CoordinateAxisType="Pressure";
double time(time);
time:units = "days since 1970-01-01 00:00:0.0";
time:long_name = "Time";
time:_CoordinateAxisType="Time"; char LatLonCoordinateSystem;
LatLonCoordinateSystem:_CoordinateAxes = "time level lat lon";

In this case we create a Coordinate System Variable, a dummy variable whose purpose is to define a CoordinateSystem. The data Variables now point to it with a _CoordinateSystem attribute.

Rule: A CoordinateSystem may be explicitly defined by a Coordinate System Variable, which always has a _CoordinateAxes attribute.

Example 3: Multiple Coordinate Systems

dimensions:
y = 428;
x = 614;
time = 2;
depth_below_surface = 4;

variables: float Soil_temperature(time, depth_below_surface, y, x); Soil_temperature:units = "K";
Soil_temperature:_CoordinateSystems = "ProjectionCoordinateSystem LatLonCoordinateSystem"; float Volumetric_Soil_Moisture_Content(time, depth_below_surface, y, x);
Volumetric_Soil_Moisture_Content:units = "fraction"; Volumetric_Soil_Moisture_Content:_CoordinateSystems = "ProjectionCoordinateSystem LatLonCoordinateSystem"; double y(y);
y:units = "km";
y:long_name = "y coordinate of projection";
y:_CoordinateAxisType = "GeoY";
double x(x);
x:units = "km";
x:long_name = "x coordinate of projection";
x:_CoordinateAxisType = "GeoX";

int time(time);
time:long_name = "forecast time";
time:units = "hours since 2003-09-03T00:00:00Z"; time:_CoordinateAxisType = "Time";

double depth_below_surface(depth_below_surface);
depth_below_surface:long_name = "Depth below land surface";
depth_below_surface:units = "m";
depth_below_surface:_CoordinateAxisType = "Height"; depth_below_surface:_CoordinateZisPositive = "down";
double lat(y, x);
lat:units = "degrees_north";
lat:long_name = "latitude coordinate";
lat:_CoordinateAxisType = "Lat";
double lon(y, x);
lon:units = "degrees_east";
lon:long_name = "longitude coordinate";
lon:_CoordinateAxisType = "Lon"; char LatLonCoordinateSystem;
LatLonCoordinateSystem:_CoordinateAxes = "time depth_below_surface lat lon"; char ProjectionCoordinateSystem;
ProjectionCoordinateSystem:_CoordinateAxes = "time depth_below_surface y x";

In this case, the data Variables have two coordinate systems, the LatLonCoordinateSystem and the ProjectionCoordinateSystem.

Note that for projection coordinates, use AxisType = GeoX and GeoY. We also introduce the _CoordinateZisPositive attribute, which is used only on vertical Coordinate Axes (AxisType = Pressure, Height, or GeoZ), to indicate in which direction increasing values of the coordinate go.

Rule: To indicate multiple Coordinate Systems for a single data variable, you must use Coordinate System Variables and list them from the data Variable's _CoordinateSystems attribute.

Rule: Use AxisType GeoX and GeoY for projection coordinate axes.

Rule: Use the _CoordinateZisPositive attribute on vertical Coordinate Axes to indicate in whether increasing values of the coordinate go up or down.

Example 4: Adding Coordinate Transforms

dimensions:
y = 428;
x = 614;
time = 2;
depth_below_surface = 4;

variables: float Soil_temperature(time, depth_below_surface, y, x); Soil_temperature:units = "K";
Soil_temperature:_CoordinateSystems = "ProjectionCoordinateSystem"; double y(y);
y:units = "km";
y:long_name = "y coordinate of projection";
y:_CoordinateAxisType = "GeoY";
double x(x);
x:units = "km";
x:long_name = "x coordinate of projection";
x:_CoordinateAxisType = "GeoX";

int time(time);
time:long_name = "forecast time";
time:units = "hours since 2003-09-03T00:00:00Z"; time:_CoordinateAxisType = "Time";

double depth_below_surface(depth_below_surface);
depth_below_surface:long_name = "Depth below land surface";
depth_below_surface:units = "m";
depth_below_surface:_CoordinateAxisType = "Height"; depth_below_surface:_CoordinateZisPositive = "down"; char ProjectionCoordinateSystem;
ProjectionCoordinateSystem:_CoordinateAxes = "time depth_below_surface y x"; ProjectionCoordinateSystem:_CoordinateTransforms = "LambertConformalProjection"; char LambertConformalProjection;
LambertConformalProjection:_CoordinateTransformType = "Projection";
LambertConformalProjection:transform_name = "lambert_conformal_conic";
LambertConformalProjection:standard_parallel = 25.0;
LambertConformalProjection:longitude_of_central_meridian = 265.0;
LambertConformalProjection:latitude_of_projection_origin = 25.0;

To create a CoordinateTransform, we define a Coordinate Transform Variable (here called LambertConformalProjection), which is a dummy variable similar to a Coordinate System Variable (here called ProjectionCoordinateSystem). The attributes on the Coordinate Transform Variable are the parameters of the transform. The Coordinate System Variable points to it with a _CoordinateTransforms attribute. You can have multiple CoordinateTransforms for a CoordinateSystem.

Rule: A CoordinateTransform must be explicitly defined by a Coordinate Transform Variable. It is identified by having the _CoordinateTransformType attribute, or by being pointed to by a Coordinate System Variable's _CoordinateTransforms attribute.

Example 5: Reusing Variables for Coordinate System and/or Coordinate Transform Variables

dimensions:
y = 428;
x = 614;
time = 2;
depth_below_surface = 4;

variables: float Soil_temperature(time, depth_below_surface, y, x); Soil_temperature:units = "K";
Soil_temperature:_CoordinateSystems = "ProjectionCoordinateSystem"; double y(y);
y:units = "km";
y:long_name = "y coordinate of projection";
y:_CoordinateAxisType = "GeoY";
double x(x);
x:units = "km";
x:long_name = "x coordinate of projection";
x:_CoordinateAxisType = "GeoX";

int time(time);
time:long_name = "forecast time";
time:units = "hours since 2003-09-03T00:00:00Z"; time:_CoordinateAxisType = "Time";

double depth_below_surface(depth_below_surface);
depth_below_surface:long_name = "Depth below land surface";
depth_below_surface:units = "m";
depth_below_surface:_CoordinateAxisType = "Height"; depth_below_surface:_CoordinateZisPositive = "down"; char ProjectionCoordinateSystem;
ProjectionCoordinateSystem:_CoordinateAxes = "time depth_below_surface y x";
ProjectionCoordinateSystem:_CoordinateTransformType = "Projection";
ProjectionCoordinateSystem:transform_name = "lambert_conformal_conic";
ProjectionCoordinateSystem:standard_parallel = 25.0;
ProjectionCoordinateSystem:longitude_of_central_meridian = 265.0;
ProjectionCoordinateSystem:latitude_of_projection_origin = 25.0;

Here we are using the ProjectionCoordinateSystem Variable as both a Coordinate System Variable and a Coordinate Transform Variable. In this case, you must use a _CoordinateTransformType attribute to explicitly show that ProjectionCoordinateSystem is a Coordinate Transform Variable.

You can use any Variable as the Coordinate Transform Variable; here's an example using the vertical Coordinate Axis to hold a vertical transform:

dimensions:
y = 428;
x = 614;
level = 44;

variables: float Soil_temperature(level, y, x); Soil_temperature:units = "K"; Soil_temperature:_CoordinateSystems = "ProjectionCoordinateSystem"; double y(y);
y:units = "km";
y:long_name = "y coordinate of projection";
y:_CoordinateAxisType = "GeoY";
double x(x);
x:units = "km";
x:long_name = "x coordinate of projection";
x:_CoordinateAxisType = "GeoX";

double level(level);
:long_name = "hybrid level at midpoints (1000*(A+B))";
:units = "level";
:positive = "down";
:standard_name = "atmosphere_hybrid_sigma_pressure_coordinate";
:formula_terms = "a: hyam b: hybm p0: P0 ps: PS";
:_CoordinateTransformType = "Vertical";

:_CoordinateAxisType = "GeoZ";
:_CoordinateZisPositive = "down"; double P0;
:long_name = "reference pressure";
:units = "Pa"; double hyam(lev);
:long_name = "hybrid A coefficient at layer midpoints";
double hybm(lev);
:long_name = "hybrid B coefficient at layer midpoints"; float PS(time, y, x);
:units = "Pa";
:long_name = "surface pressure"; char ProjectionCoordinateSystem;
ProjectionCoordinateSystem:_CoordinateAxes = "level y x";
ProjectionCoordinateSystem:_CoordinateTransforms = "level";
ProjectionCoordinateSystem:_CoordinateTransformType = "Projection"; ProjectionCoordinateSystem:transform_name = "lambert_conformal_conic";
ProjectionCoordinateSystem:standard_parallel = 25.0;
ProjectionCoordinateSystem:longitude_of_central_meridian = 265.0;
ProjectionCoordinateSystem:latitude_of_projection_origin = 25.0;

Here again we are using the ProjectionCoordinateSystem Variable as both a Coordinate System Variable and a Coordinate Transform Variable. In addition, there is a vertical transformation on the level Variable, pointed to by the ProjectionCoordinateSystem:_CoordinateTransforms attribute.

Rule: You can turn any Variable into a Coordinate System or Coordinate Transform Variable.


Implicit Coordinate Systems

The above attributes allow for explicitly specifying Coordinate Systems for data variables. This section defines how Coordinate Systems may be implicitly defined.

Goals

Coordinate Variables and Aliases

A coordinate Variable is a one dimensional Variable with monotonic values that has the same name as its dimension.

A one-dimensional Variable with monotonic values can act as a Coordinate Variable for its dimension, even when it doesnt have the same name as the dimension. To indicate this, add an attribute to the variable called _CoordinateAliasForDimension, whose value must be the name of its single dimension. A dimension may have multiple coordinate variables in this way, which is useful, for example, if the data is a trajectory. Coordinate variables created this way are used for implicit _CoordinateAxes processing (next section). Example:

   double valtime(record);
:long_name = "valid time";
:units = "hours since 1992-1-1";
:_CoordinateAliasForDimension = "record";
:_CoordinateAxisType = "Time";

Note that its very important to also identify the Coordinate Axis type.

This can also be used to fix existing files whose coordinate Variables were not named the same as their dimension. (However, if you are writing the file, you should use correctly named coordinate Variables when possible).

We will call both regular Coordinate Variables and ones that have been defined with the _CoordinateAliasForDimension attribute Coordinate Variables.

Implicit Coordinate System

When there is no _CoordinateSystems or _CoordinateAxes attribute on a data Variable, a list of coordinate axes is constructed from the list of Coordinate Variables for the data Variable. If there are 2 or more axes, the Coordinate System for the variable is found by examining all Coordinate Systems and matching exactly its list of Coordinate Axes. If there is no existing Coordinate System that matches, one is added, and this is called an implicit Coordinate System.

Assigning CoordinateTransforms

The only way to add a Coordinate Transform to an implicit Coordinate System, is to add a _CoordinateAxes or _CoordinateAxisTypes attribute to the Coordinate Transform Variable listing the names or types of Coordinate Axes. The Coordinate Transform will be addded to any Coordinate System that contains all named axes. For example:

   char ProjectionCoordinateSystem;
ProjectionCoordinateSystem:_CoordinateTransformType = "Projection"; ProjectionCoordinateSystem:_CoordinateAxisTypes = "GeoX GeoY";

will apply to any CoordinateSystem that has both GeoX and GeoY Coordinate axes.

   char VerticalCoordinateSystem;
VerticalCoordinateSystem:_CoordinateTransformType = "Vertical"; VerticalCoordinateSystem:_CoordinateAxes = "hybrid";

will apply to any CoordinateSystem that has the Coordinate Axis named "hybrid"..


Coordinate Transform Variables

A Coordinate Transform Variable is a container for information about a transformation function from a Coordinate System to a Reference Coordinate System. At a minimum it must have a transform_name attribute. (alias grid_mapping_name or standard_name for CF compatability).

 char Lambert_Conformal_Projection;
Lambert_Conformal_Projection:transform_name = "lambert_conformal_conic";
Lambert_Conformal_Projection:standard_parallel = 25.0;
Lambert_Conformal_Projection:longitude_of_central_meridian = 265.0;
Lambert_Conformal_Projection:latitude_of_projection_origin = 25.0;

When a Coordinate System has only one Coordinate Transform, the information on the transform may be added directly to the Coordinate System Variable. The Variable acts as both a Coordinate System and a Coordinate Transform. Example:

 char ProjectionCoordinateSystem;
  ProjectionCoordinateSystem:_CoordinateAxes = "time depth_below_surface y x";
  ProjectionCoordinateSystem:transform_name = "lambert_conformal_conic";
ProjectionCoordinateSystem:standard_parallel = 25.0;
ProjectionCoordinateSystem:longitude_of_central_meridian = 265.0;
ProjectionCoordinateSystem:latitude_of_projection_origin = 25.0;

You can use a CF grid mapping or dimensionless vertical coordinate as a transform:

 char ProjectionCoordinateSystem;
  ProjectionCoordinateSystem:_CoordinateAxes = "time depth_below_surface y x";
  ProjectionCoordinateSystem:_CoordinateTransforms = "Lambert_Conformal lev";
 int Lambert_Conformal;
  Lambert_Conformal:grid_mapping_name = "lambert_conformal_conic";
  Lambert_Conformal:standard_parallel = 25.0;
  Lambert_Conformal:longitude_of_central_meridian = 265.0;
  Lambert_Conformal:latitude_of_projection_origin = 25.0;
 float lev(lev) ;
  lev:long_name = "sigma at layer midpoints" ;
  lev:positive = "down" ;
  lev:standard_name = "atmosphere_sigma_coordinate" ;
  lev:formula_terms = "sigma: lev ps: PS ptop: PTOP" ;

Generally the set of valid transforms are not specified by this _Coordinates Convention. The transforms that the nj22 library recognizes come from the CF grid mappings and vertical transforms, so these are recommended, when possible, for the actual transform content.

It is often convenient to define the Coordinate Transform Variable and have it point to the Coordinate Systems that use it. For this purpose, you can use the _CoordinateSystems attribute on a Coordinate Transform Variable. You also need to add the _CoordinateTransformType attribute to make sure it is interpreted as a Coordinate Transform variable instead of a data variable.

 int Lambert_Conformal;
  Lambert_Conformal:grid_mapping_name = "lambert_conformal_conic";
  Lambert_Conformal:standard_parallel = 25.0;
  Lambert_Conformal:longitude_of_central_meridian = 265.0;
  Lambert_Conformal:latitude_of_projection_origin = 25.0;
   Lambert_Conformal:_CoordinateTransformType = "Projection";
   Lambert_Conformal:_CoordinateSystems = "ProjectionCoordinateSystem";

For dealing with implicitly defined Coordinate Systems, you can use the _CoordinateAxes attribute:

 int Lambert_Conformal;
  Lambert_Conformal:grid_mapping_name = "lambert_conformal_conic";
  Lambert_Conformal:standard_parallel = 25.0;
  Lambert_Conformal:longitude_of_central_meridian = 265.0;
  Lambert_Conformal:latitude_of_projection_origin = 25.0;
   Lambert_Conformal:_CoordinateTransformType = "Projection";
   Lambert_Conformal:_CoordinateAxes = "y x";

This means to apply it to any Coordinate System that includes the x and y Coordinate Axes.


This document was last updated July 2013